Metal Roofing and Siding Built for Alberta Homes
Red Deer winters are hard on roofs. Freeze-thaw cycles, heavy snow loads, spring hail and high winds put every material to the test. Metal roofing is different, and so is the way we install it.
RemStar Roofing has been installing metal roofing and siding across Red Deer and Central Alberta since 2010. We operate our own metal fabrication shop right here in Red Deer, which means we can produce custom panels, matching flashings and specialty profiles in-house when your project calls for it, and we have strong supplier relationships for standard materials when that is the better fit.
We carry a full range of metal profiles: standing seam snaplock, corrugated, mechanically seamed, board and batten, woodgrain plank, flushwall and agricultural panels. We are also the only authorized BTR Systems representative in Alberta, giving our customers exclusive access to BTR's full line of steel shingles and stone chip profiles.
Get a Free Quote →What Sets Us Apart
There are other metal roof installers in Red Deer. Here is why homeowners and builders keep calling us.
Our Own Metal Shop in Red Deer
We operate a full metal fabrication shop in Red Deer, which means custom panels, profiles and flashings can be produced in-house for your project. For standard materials we work with quality suppliers, giving us flexibility to do what is right for each job rather than being locked into one approach.
Dedicated Project Managers
Every job has a single point of contact who keeps you informed from quote through to final cleanup. You will always know where your project stands so there's no chasing, no surprises, no wondering when the roofers are showing up.
Lifetime Workmanship Warranty
We back every installation with a lifetime warranty on our workmanship. No matter if its been two years or ten. This is how confident we are in the way we build and install metal roofing.
Building Metal Roofs Here Since 2010
We have installed metal roofing on homes, commercial buildings, arenas and agricultural structures across Red Deer, Lacombe, Ponoka, Rocky Mountain House and throughout Central Alberta. Our depth of experience shows up in every job we take on.
Safety Protocols on Every Site
Our crews follow strict safety procedures on every job. Your home and your family are protected throughout the entire installation process.
Only BTR Systems Rep in Alberta
RemStar is the only authorized BTR Systems representative in the province. Our customers have access to BTR's full line of steel shingles, stone chip profiles and steel gutters, these are products no other Alberta installer can supply.
Having our own fabrication shop means we can build custom profiles and flashings that match your home exactly. That level of detail is what separates a roof that looks good from one that is built to last.RemStar Roofing — Metal Fabrication Shop, Red Deer AB
Why Metal Roofing Makes Sense in Alberta
Built to Last a Lifetime
A quality metal roof installed in Alberta typically lasts 50-75yrs or more, that is two or three asphalt roofs in the same timeframe, without the repeat cost of tearing off and re-roofing. Or the environmental cost of masses of asphalt shingles in the landfill. A metal roof can be a smart investment in more ways than one.
Built for Alberta's Tough Climate
Alberta's climate is genuinely hard on building materials. Spring hail, summer heat, freeze-thaw cycles through shoulder seasons and heavy snow loads in winter all take their toll. Our steel panels handle all of it without cracking, curling or absorbing moisture. Snow sheds naturally off a metal roof rather than sitting against the structure, reducing ice dam risk and the cumulative load that damages traditional shingles over time. Metal does not support moss or algae growth either, so your roof stays looking sharp for decades.
Cost over time
A Smarter Long-Term Investment
Metal roofing costs more upfront than asphalt, and we will always be straightforward about that. But when you factor in 50-plus years of service life, minimal maintenance, no re-roofing cycles and the energy efficiency gains from metal's natural reflectivity, the lifetime cost is typically lower than asphalt. It also adds measurable resale value, buyers and appraisers recognize a metal roof as a feature that reduces their future cost of ownership, and that shows up in what people will pay for your home.
Metal Roofing & Siding Types
Snaplock Metal Roofing and Siding
Snap Lock Panels have no exposed screws which create a unique look for any roofing or siding project. The snap lock application is a high-performance roofing system with excellent wind uplift resistance and water infiltration.
We offer snaplock panels in 24ga or 26ga.
12-20″ widths.
Corrugated Metal Roofing and Siding
These roofing sheets are stylish and strong for all your residential, commercial and agricultural roofing and cladding projects.
Available in 26 or 29 gauge.
6" Woodgrain Plank Style Panels
ADM’s Ultra Panel is a 6″ wide panel cut in 24 or 26 gauge steel. This profile is often used as an exterior accent or soffit. It can be printed in premium woodgrain or any colour metal. A great choice to add elegance and contrast to any exterior.
Flushwall Metal Roofing, Siding & Soffits
Agricultural Metal Roofing and Siding
This popular and versatile metal roofing panel features classic looks and is installed in a wide range of applications including roofing for residential, commercial, and post-frame buildings. We offer it in 26ga & 29ga.
Mechanically Seamed for Low Sloped Metal Roofing
Mechanically seamed metal roof panels offer the all of the same capabilities as the snap-lock roof panels, but are better used on shallow or sloped roofs and are also better suited for use on fascias, soffits, and walls. These panels are 12-20″ wide and available in 22, 24 or 26gauge.
Board & Batten Style Metal Panels
Board and batten metal panels are crafted from sheets of metal, ingeniously bent to mimic the traditional look of alternating wide boards and narrow battens. This design combines the aesthetic charm of wood with the resilience and ease of maintenance of metal. Offering a seamless, durable facade, these panels are available in a range of colors and finishes, making them a versatile choice for a variety of architectural styles.
Metal/ Steel Roofing Shingles
If you love the look of traditional roofing materials but want the durability and longevity of metal, BTR Systems profiles deliver both. RemStar Roofing is the only authorized BTR Systems representative in Alberta, giving our customers exclusive access to one of Canada’s most respected lines of steel shingles.
The Banff profile replicates the warmth and texture of classic cedar shake without any of the maintenance headaches. The Whistler brings a refined European slate aesthetic to Alberta homes. Prefer something with added weight and texture? The stone chip collection including Thunder, Blizzard, Polar and Mistral adds a granular finish that closely mimics the look of traditional shingles while still delivering the full benefits of a steel roof.
Every BTR Systems profile is manufactured to withstand Alberta’s freeze-thaw cycles, hail seasons and heavy snow loads. As the only BTR rep in the province, we carry the full product line and can help you select the right profile for your home’s style, slope and budget.
Metal Gutters
Our Work
Recent Metal Roofing Projects
Why Choose RemStar for Metal Roofing in Red Deer?
BENEFITS OF METAL ROOFING IN RED DEER
Exceptional Longevity With metal roofing from our company, expect a durable solution that lasts over 50 years. Our high-quality steel and metal panels are designed for enduring performance.
Unmatched Weather Resistance Metal roofing systems are engineered to withstand severe weather conditions. From hail and high winds to heavy rainfall and fire, steel roofs offer superior protection against all elements Mother Nature can unleash.
Value Enhancement Choosing our metal roofing installation services in Red Deer is an investment in your property. As a premium roofing option, it not only adds equity to your home or business through its superior longevity and minimal maintenance needs but also ensures long-term savings.
Metal Roofing FAQ
Is a metal roof loud?
Many people assume metal roofs are noisier than other types of roofing materials during rain or hail, but this common belief is largely a misconception. Modern metal roofing systems are designed with advanced technology and installation practices that significantly reduce noise levels. Unlike the bare metal roofs of the past, today’s metal roofs are installed over a solid substrate. Additionally, insulation and underlayment layers act as effective sound barriers, dampening noise from rain, hail, and outside disturbances. This construction ensures that metal roofs can be just as quiet as, if not quieter than, roofs made from traditional materials like asphalt shingles or tiles. The combination of these elements means that the serene ambiance inside your home remains undisturbed, offering peace and comfort regardless of the weather conditions outside.
Will a metal roof rust?
The belief that metal roofs inevitably succumb to rust is outdated, thanks to significant advancements in metal roofing technology. Today’s metal roofs are far more resilient against rust and corrosion, primarily due to the innovative materials and protective coatings used in their construction. These roofs are typically made from galvanized steel or aluminum, metals known for their resistance to corrosion. Galvanized steel, for example, is steel coated with a protective layer of zinc, which sacrificially protects the base metal from rusting. Similarly, aluminum naturally forms a protective oxide layer when exposed to oxygen, further enhancing its resistance to corrosion.
Moreover, modern metal roofing materials often receive additional protective coatings beyond the initial galvanization or aluminum base. These can include special paint systems and metallic coatings designed to seal the metal from moisture and environmental contaminants, the primary culprits of rust. These coatings are meticulously engineered to adhere to the metal surface, providing a durable barrier that extends the life of the roof significantly.
The combination of these protective measures means that today’s metal roofs are equipped to withstand the elements for decades without showing signs of rust. This durability is a key reason why homeowners and builders opt for metal roofing, ensuring long-term performance and aesthetic appeal with minimal maintenance.
Do I have to have my old shingles removed?
While it’s not always necessary to remove your existing shingles before installing a new metal roof, the decision to do so should be made after careful consideration of various factors. At RemStar, we understand that each roofing project is unique, and there might be situations where installing a metal roof over existing shingles could be considered. However, it’s crucial to be aware that skipping the removal of old roofing materials may conceal potential issues such as hidden damage, water intrusion, mold, or rot that could compromise the integrity and performance of your new roof.
Opting to install directly over old shingles might seem like a cost-effective and time-saving choice initially, but it’s important to consider the long-term implications. Any underlying problems could lead to costly repairs in the future, possibly involving the removal of the new metal roof to address issues from the existing roof.
Given these considerations, we highly recommend consulting with our team at RemStar before making a decision. We’re here to conduct a thorough assessment of your current roof’s condition and discuss the best course of action tailored to your specific needs and circumstances. Our goal is to ensure that you are fully informed and confident in the choices you make for your roofing project, guaranteeing the best possible outcome for your home.
Is a metal roof difficult to maintain?
Metal roofs are often celebrated for their minimal maintenance requirements, a significant advantage that sets them apart from other roofing materials. This ease of upkeep is rooted in several key characteristics inherent to metal roofing:
- Weather Resistance: Metal roofs are engineered to withstand severe weather, including heavy rains, high winds, snow, and extreme temperatures. This resilience means less frequent repairs or replacements due to weather-related damage.
- Debris Shedding: The sleek surface of metal roofs allows for easy shedding of leaves, branches, and other debris that can accumulate. This feature, coupled with the roof’s ability to effectively channel water away through well-designed gutter systems, minimizes the need for manual cleaning.
- Low Lifecycle Cost: Although the initial installation cost of a metal roof may be higher than some alternatives, its long lifespan and low maintenance requirements result in a lower total cost of ownership. Regular maintenance tasks are typically limited to inspections and gutter cleaning, reducing the need for professional services.
- Ease of Repair: Should a section of the metal roof become damaged, it is often possible to replace just the affected panels rather than undertaking a full roof replacement. This modularity makes repairs simpler and more cost-effective.
These features contribute to a metal roof’s reputation for being low-maintenance. Homeowners and building managers appreciate the combination of durability, aesthetic appeal, and the minimal effort required to keep metal roofs in excellent condition throughout their extended lifespan.
Get a free quote
Submit your details, and one of our Red Deer roofing experts will reach out to you promptly.
Call us today for your Free Estimate.
Specifications
Metal Roofing Specifications
Most roofing quotes leave the details out. Here is exactly what we install, so you can compare our quote against anyone else's on the same terms.
24, 26 and 29 gauge steel. Heavier gauge means a flatter panel and better dent resistance.
Galvalume, an aluminum-zinc coated steel that outlasts plain galvanized through Alberta freeze-thaw cycles.
PVDF and SMP. PVDF holds colour longest against UV. SMP is the value option with strong performance.
Snaplock standing seam, mechanically seamed standing seam, and TRQ 250. No screws through the face of the panel.
Corrugated and agricultural panel, for shops, outbuildings and acreage projects.
1 inch to 2.5 inches, chosen for roof pitch, snow load and appearance.
12 inches to 42 inches.
Brake formed to 21 feet, roll formed to 50 feet, and roll formed to any length on site. Longer runs mean fewer seams, and fewer seams mean fewer places for water to find.
Board and batten, woodgrain plank, flushwall and soffit, plus BTR Systems steel shingles and stone chip profiles.
Alberta Direct Metal, Cascadia Metals and BTR Systems. We are the only authorized BTR Systems representative in Alberta.
Panels and flashings are formed in our own metal shop in Red Deer. Nothing waits on a supplier for a custom piece.
Roofnado AnchorDeck PSU self-adhered ice and water shield, with Roofnado AnchorDeck synthetic underlayment across the field. Both rated from minus 40 to 240 degrees Fahrenheit.
ARCA folded and hemmed valley detail, hemmed eaves, booted penetrations. Existing flashings replaced wherever the construction allows.
Lifetime on residential installations, with no time limit and no fine print. Material warranties are separate and vary by product.
Not sure which of these you need? That is what the site visit is for. We walk your roof, take the measurements, and put the specification in writing on the quote.
Before you sign anything
Questions to Ask Any Metal Roofer
Two metal roof quotes can differ by thousands of dollars and be for completely different roofs. These are the questions that explain the gap. Ask every contractor you are considering, including us.
What exact profile is being installed?
Standing seam covers several different systems. We install snaplock, mechanically seamed and TRQ 250 as concealed fastener options, plus corrugated and agricultural panel where exposed fasteners make sense.
What gauge is the steel?
We offer 24, 26 and 29 gauge. A quote that does not state the gauge is not a quote you can compare.
What is the substrate?
Galvalume steel. It handles Alberta freeze-thaw cycles better than plain galvanized.
Concealed or exposed fastener?
Concealed fastener systems hide the screws under the seam, so nothing penetrates the face of the panel. Exposed fastener systems cost less and suit shops, barns and outbuildings. We install both, and we will tell you plainly which one your roof calls for.
What paint system?
PVDF or SMP. PVDF costs more and holds its colour longest. SMP performs well at a lower price. The paint system, not the colour, decides how the roof looks in twenty years.
Who manufactures the panels?
We supply Alberta Direct Metal, Cascadia Metals and BTR Systems, and we form panels ourselves in our Red Deer shop.
Who fabricates the trims and flashings?
We do, in house. This is the question that separates most quotes. A contractor ordering stock flashings works with whatever arrives. We bend ours to fit the roof in front of us, and a wrong piece on Friday is remade on Monday.
How long can the panels run?
Brake formed to 21 feet, roll formed to 50 feet, and roll formed to any length right on your driveway. A continuous panel from ridge to eave has no lap seams in it at all.
What seam height, and why that one?
We install 1 inch through 2.5 inch seams. Pitch, snow load and appearance all factor in. Anyone quoting a metal roof should be able to tell you why they picked theirs.
What underlayment goes under the panels?
Roofnado AnchorDeck. The self-adhered AnchorDeck PSU ice and water shield goes where water sits and ice dams form, and the AnchorDeck synthetic underlayment covers the rest of the field. Both stay workable from minus 40 to 240 degrees Fahrenheit, which matters when a roof goes on in February. Underlayment is the line that gets quietly downgraded, so ask what is going under your panels.
How are the valleys detailed?
We use the ARCA folded and hemmed valley detail, the method set out by the Alberta Roofing Contractors Association. A hemmed valley locks the panel edge over itself rather than relying on sealant to keep water out, so it is still doing its job in twenty years when caulking would have failed.
How are penetrations and eaves handled?
Penetrations are booted. Eaves are hemmed. Both are places where a roof either sheds water for decades or starts leaking in year five, and neither is visible from the ground once the job is done, which is exactly why it is worth asking.
Are existing flashings replaced or reused?
We replace them wherever the construction allows. New panels over old flashings is a shortcut that shows up later, and since we fabricate our own flashings there is no cost reason for us to reuse them.
Can you show me a roof you installed five to ten years ago?
Yes. Ask on the site visit and we will point you at metal roofs we installed across Central Alberta years ago, so you can see how the panels, the paint and the flashings have held up. A new roof looks good in any photograph. An older one tells you something.
Workmanship warranty or material warranty?
They are two different things and both matter. The material warranty comes from the manufacturer and covers the panel. The workmanship warranty comes from the contractor and covers the installation. Ours is lifetime on residential work, with no time limit and no fine print.
Other Residential Services We Offer in Red Deer
Asphalt Roofing
Asphalt shingle repairs and total roof replacements for Red Deer homeowners.
Learn More →
Specialty Residential Roofing
Euroshield rubber roofing and BTR Systems steel shingles — specialty products installed by the only authorized Alberta rep.
Learn More →
Residential Exteriors
Woodgrain, board and batten and custom metal panels fabricated in our own Red Deer shop to accent your home's exterior.
Learn More →
Inspections & Repairs
Scheduled maintenance and on-demand repairs to keep your roof performing through every Alberta season.
Learn More →