Architectural Cladding & Commercial Siding, Built to Perform.
Steel cladding, extruded aluminum, ACM panels and specialty siding – installed by Alberta crews backed by Red Deer’s only in-house metal fabrication shop. From new construction to full facade retrofits.
The Right Envelope for Every Building
We install the industry’s most specified commercial cladding systems – and because we fabricate flashings, trims and custom profiles in our own Red Deer shop, your project never waits on a supplier.
Steel Cladding
Non-combustible, Class A fire-rated steel panels in 24-26 gauge with hidden-fastener systems and embossed woodgrain finishes. Canadian-made, engineered for Alberta wind and hail, with manufacturer warranties up to 40 years.
- Standing Seam Panels
- 936 Panels
- Corrugated Panels
- 12-36 Panels
- Pro-Board Panels
- 636 Panels
- 942 Panels
- Allclad Panels
- Weathershield Panels
- Board & Batten Panels
- Woodgrain Panels
- Flushwall Panels
Extruded Aluminum Cladding
Premium 6063-T5 extruded aluminum planks – 100% non-combustible, corrosion-resistant, and finished in AAMA 2604/2605 certified powder coats. Over 50 woodgrain and solid finishes backed by a 50-year limited warranty.
- Longboard Architectural Products
- AL-13 V Groove
ACM & ACM Alternatives
Clean, modern reveal-joint facades. The AL-13 system is mechanically fastened with no caulking, cut to fit on-site (no off-site fabrication delays), offers fire-rated core options, and allows single panels to be replaced if ever damaged.
- Easy Trim Reveals
- AL-13 Panel System
- Hardie Panels
Specialty Siding / Manufactured Stone
Fiber cement and stone veneer systems that add texture and contrast to commercial facades. Hardie fiber cement resists rot, pests and fire with baked-on ColorPlus finishes; Versetta Stone installs as a mortarless panelized veneer.
- James Hardie Siding Products
- Ceraclad
- Versetta Stone
Why We Specify These Systems
Some of the product lines we install most often, and why they earn their place on your building. Hover over a product to learn more.
- Standing Seam Panels
Standing Seam Panels
Concealed-fastener vertical panels with crisp raised seams – the premium choice for walls and roofs where clean lines and weather-tightness matter most. No exposed screws means nothing to back out or leak over time.
- 936 Panels
936 Panels
A classic structural panel with evenly spaced ribs over 36-inch coverage – economical, quick to install, and a proven workhorse on commercial and agricultural walls and roofs.
- Corrugated Panels
Corrugated Panels
The timeless rounded-wave profile – tough, versatile, and increasingly popular for modern industrial-look facades and feature walls as much as for barns and shops.
- 12-36 Panels
12-36 Panels
A clean structural profile with ribs on 12-inch centres over 36-inch coverage – a versatile choice for walls, roofs and liner applications across commercial and agricultural buildings.
- Pro-Board Panels
Pro-Board Panels
A sleek, low-maintenance plank profile for walls and soffits with a smooth architectural finish – a clean modern alternative to traditional siding boards.
- 636 Panels
636 Panels
A tight-ribbed structural panel that gives walls a strong, even shadow line – durable, cost-effective and well suited to large commercial elevations.
- 942 Panels
942 Panels
A bold wide-rib structural panel built for spanning strength – a dependable pick for large commercial and agricultural walls that need rigidity and speed of coverage.
- Allclad Panels
Allclad Panels
A concealed-fastener architectural wall panel with a flat, refined face – designed for commercial facades where a smooth, premium appearance is the goal.
- Weathershield Panels
Weathershield Panels
A rugged profile built for harsh prairie weather – a dependable, hardworking choice for shops, agricultural buildings and any wall that takes a beating from wind and hail.
- Board & Batten Panels
Board & Batten Panels
The traditional board-and-batten look in maintenance-free metal – wide flat boards with raised battens that suit everything from farmhouse character to sharp modern facades.
- Woodgrain Panels
Woodgrain Panels
Metal planks with realistic woodgrain finishes – the warmth of wood siding with steel durability, and none of the staining, sealing or rot that comes with the real thing.
- Flushwall Panels
Flushwall Panels
Flat, flush-joint panels for walls and soffits – a smooth, contemporary surface with concealed fasteners that reads as one continuous plane from the street.
- Longboard
Longboard Architectural Products
Extruded from 6063-T5 architectural aluminum – 100% non-combustible and will not rot, warp or dent in normal service. Over 50 woodgrain and solid finishes in AAMA 2604/2605 certified powder coat, backed by a 50-year limited warranty.
- AL-13 V Groove
AL-13 V Groove
Extruded aluminum plank cladding with a crisp V-groove joint that creates a clean, linear slat look. Powder-coated, mechanically fastened and non-combustible – a premium accent for storefronts and feature walls.
- Easy Trim Reveals
Easy Trim Reveals
An engineered aluminum trim-and-reveal system that gives fiber cement and panel facades crisp architectural joint lines – achieving the modern ACM look at a friendlier budget when paired with Hardie Panel.
- AL-13 Panel System
AL-13 Panel System
An engineered alternative to traditional ACM: fully mechanically fastened with no caulking or adhesives, cut to fit on-site to eliminate off-site fabrication lead times. Fire-rated cores meet NFPA 285 and CAN/ULC standards, and single panels can be swapped if ever damaged.
- Hardie Panels
Hardie Panels
Large-format fiber cement panels that won’t ignite when exposed to direct flame and resist rot, swelling and pests. Paired with reveal systems for a clean panelized facade at a strong price point.
- James Hardie Siding
James Hardie Siding Products
The industry benchmark in fiber cement, engineered for extreme climates. Factory-baked ColorPlus finishes resist peeling, chipping and fading for decades, with a 40-50 year service life when properly installed.
- Ceraclad
Ceraclad
Ceramic-coated fiber cement rain-screen panels with self-cleaning surfaces and exceptionally durable factory finishes – a high-performance building envelope with a distinctive architectural texture.
- Versetta Stone
Versetta Stone
Authentic stone character in a mortarless, panelized format that installs with hidden fasteners in any season. Lighter and faster than real masonry, which keeps schedules and budgets in check.
Many products. One trusted installer.
Hover over any product on the left to see what it is, what it’s best at, and why we stand behind it. These are just a sample of what we install – if you don’t see the product you’re after, reach out and we’ll make it happen.
The Only Exteriors Contractor in Central Alberta With Its Own Metal Shop
General contractors, property owners and architects choose RemStar because we control the entire process – estimating, fabrication, installation and warranty – under one roof, with our own crews.
The In-House Fabrication Advantage
When a project calls for custom flashings, trims or specialty profiles, our Red Deer metal shop can form them on demand – cutting supplier lead times out of the schedule and ensuring an exact fit.
Our Own Trained Crews
In-house installers led by a dedicated project manager – consistent quality, clear communication, and a schedule that holds.
Safety-Certified for Commercial & Government Sites
Fall protection, aerial work platforms, hoisting & rigging, WHMIS, first aid and more – with the documentation commercial contracts require.
Warranty We Stand Behind
5-year commercial workmanship warranty standard, with manufacturer-backed system warranty upgrades available on qualifying projects.
From Site Visit to Final Walkthrough
A clear, managed process – so contractors and owners always know what happens next.
Consultation
Site visit, building assessment and material discussion matched to your goals.
Itemized Quote
A clear, detailed estimate with no hidden costs.
Fabrication
Panels, trims and flashings produced in our own Red Deer metal shop.
Installation
Our in-house crews install on schedule, led by a dedicated project manager.
Warranty & Support
Final walkthrough, warranty documentation, and a team that answers the phone.
See Our Work In Action
A behind-the-scenes look at a couple of our projects – find plenty more on our channel.
Built for Contractors, Owners & Architects
General Contractors
Reliable scheduling, complete safety documentation, and in-house fabrication that keeps your critical path moving. We show up when we say we will – and our crews stay until it’s done right.
Property Owners & Managers
Facade upgrades and re-clads that modernize your building, protect the envelope, and add real value – with minimal disruption to tenants and operations.
Architects & Planners
We work from your specs with Longboard, AL-13, Hardie, Ceraclad and custom-formed metal – and we’ll flag constructability issues before they become change orders.
Projects Across Alberta
Commercial Exteriors FAQ
How do I know RemStar is an established, trustworthy contractor?
Which cladding system is right for my building?
Do you work on new construction and retrofits?
What warranty comes with commercial exterior work?
How much does commercial cladding cost?
Can you fabricate custom profiles and flashings?
Trusted by Businesses Across Central Alberta
Call us today for your Free Estimate.
Response within 1 business day – serving Red Deer, Calgary, Edmonton & all of Central Alberta.